SCADA/HMI in the browser

Live mimic diagrams of facilities, shared like a document

vuzol is dispatching of ventilation, boiler rooms and cold stores in the browser. Draw a mimic diagram from ready blocks, bind the blocks to live values of the equipment and share it: some people edit, others watch it live.

The interface speaks Ukrainian and English. Accounts are created by invitation.

Three steps to a live mimic diagram

  1. Draw

    Build a mimic diagram of the facility from the blocks of the catalogue, right in the browser. A floor plan or a drawing can go under it.

  2. Connect

    Put a gateway at the facility: it reads the equipment over Modbus and sends the values to vuzol by itself. Bind blocks to points, and the diagram comes alive.

  3. Share

    Invite colleagues and give each of them a role. Editors change the diagram, dispatchers and viewers watch it live.

One diagram, a role for everyone

Access works like a shared document: viewer, dispatcher, editor and owner, set for each facility.

The editor draws

Builds the diagram from the blocks of the catalogue, puts a plan or a drawing under it and binds blocks to points.

The dispatcher and the viewer watch

They see values and alarms live. The dispatcher also sends setpoints and commands.

An alarm reaches the phone

A notice of an alarm comes by email and Telegram, so nobody has to watch the screen all the time.

About 130 blocks in nine categories

The catalogue holds the equipment of ventilation, boiler rooms and cold stores. The blocks are ready: pick one, put it on the diagram and bind it to a point.

  • Air and ventilation
  • Heat recovery
  • Heating
  • Cooling
  • Water and valves
  • Sensors and meters
  • Electrical and controls
  • Building
  • Labels and indicators

Alarms, history, control

A mimic diagram shows what is happening at the facility now. Three more things help to learn in time, to understand and to step in.

Alarms

Every point has its limits. When a value leaves them, the block on the diagram gets a marker and people get a notice by email and Telegram. An alarm is acknowledged by a person.

History

The values of every point are kept. Open a point and see on a chart how it behaved.

Control

A dispatcher sends a setpoint or a command to a writable point. A journal keeps who sent what.

How the equipment connects

The gateway connects out to vuzol by itself, so nothing is opened on the router of the facility.

  1. Equipment

    Devices of the facility with Modbus RTU or Modbus TCP.

  2. Gateway at the facility

    A Raspberry Pi with the vuzol gateway program reads the devices.

  3. Internet

    The gateway makes the outgoing connection by itself.

  4. vuzol

    Mimic diagrams, alarms and history in the browser.

  • Modbus RTU
  • Modbus TCP
  • Raspberry Pi
  • Email
  • Telegram

Questions and answers

How do people get access?
By invitation. Accounts are created only by invitation, and the role of a person is set for each facility.
Which equipment does vuzol read?
Equipment that speaks Modbus RTU or Modbus TCP. A gateway at the facility reads it. Modbus is the only protocol for now.
What is a gateway, and must the router be opened?
A gateway is a small computer at the facility: a Raspberry Pi with the vuzol gateway program. It reads the equipment and connects out to vuzol by itself, so nothing is opened on the router of the facility.
All questions and answers

Start with your first mimic diagram

vuzol is at an early stage, so some things will still change.